Add your License Code

1. Log in.

2. Go to the Settings screen (⚙ icon).

3. Scroll down to + Add license.

✓ LICENSE CODE window opens.

4. Type in license code. Press Add.

Capital letters are not necessary.

✓ The licence appears under ACTIVITIES/FEATURES.

Add students (Coach licence)

1. On the Home page (⌂), tap ADD STUDENT.

2. Fill out the form, and tap Save.

Alternatively: Share your instructor code with your students. (Home page > Your account > Pencil icon > Instructor code). When a student adds you as a coach, you’ll get a notification in the app (🔔 icon).

Add a coach (Student licence)

1. On the Home page (⌂), tap on your name.

2. Tap on the Pencil icon next to your name.

3. Enter the Instructor Code, and tap Save.

Note: Your instructor needs to accept your invitation. 

Pair your Sensor (Student licence)

1. Turn the sensor upside down for 4 seconds, until it starts blinking.

2. Go to the Sensor screen (Sensor icon).

3. Tap on the Gen 4 BLE tab.

4. Tap the + icon.

5. Tap the START CONNECTING button.

Tap CANCEL PAIRING if you want to stop the process.

6. On the Sensors Paired screen, tap CONFIRM.

✓ On the Sensor screen, the sensor is listed.

Note: Once paired, the sensor is listed on the Sensor screen. To connect, tap the Bluetooth icon. 

Start the Module (Student licence)

3. On the Home page (⌂), tap on your name.

4. Tap on the Modules tab.

5. Next to Figure Skating Measurement, tap on the green OPEN button.

6. Tap START MEASUREMENT.

7. On the Sensor Setup screen, tap CONNECT.

✓ Successfully connected to 1 sensor.

8. Place the green sensor on the hip, and tap NEXT.

9. On the Figure Skating Measurements screen, tap the green START button.

10. After finishing your practice, tap the red STOP button.

Tip: You can run the module in the background. After starting the module, tap on the X button. In the Keep running this module? window, select Keep Running.

Check Results (Student and Coach licences)

1. On the Home page (⌂), tap on your or your student’s name.

2. Tap on the Modules tab.

3. Next to Figure Skating Measurement, tap on the OPEN button.

4. At the top of the screen, select the date range to find the relevant captures listed.

LED Coloring on the Sensor

Each sensor has an LED light in the bottom right corner. The color of this LED indicates the status of the sensor:

• Red blinking: low battery < 10% 

• Pulsing green light: charging 

• Green blinking: fully charged 

• Yellow blinking: active sensor

• Yellow blinking twice per second: sensor connected to the device

Troubleshooting tips:

• Make sure Bluetooth is turned on your device (iOS Settings app > Bluetooth > toggle ON).

• Make sure that there are max. 6 Bluetooth devices connected to the device, and the sensor should be one of them.

• Make sure that the sensors are within the Bluetooth range (15m or 50ft) of your device during: connecting to the sensor, sensor placement, and stopping the module.